MICRO-JET Sprayer
MICRO-JET (sprayer) is used to disinfect the Surface and atmosphere by using D – 125. Allowing the spray to reach each & every corner of an enclosed area. Add 15 ml of D-125 concentrate with 1000 ml of tap water for Spraying doors, walls, furniture, equipment, operation tables, O.T. lamp, etc.
Operating Instructions
To Fill Unscrew sprayer head and ll container to “ll” line or other desired capacity below the mark. Screw-on head assembly only to ensure an airtight seal. The liquid must be clean and free of foreign matter. Be sure to leave enough space for compressed air. Fill to the desired level, not higher than the top (2.0 L) mark.
To Pressurize: Pump the ll ed tank with full strokes to build up pressure. The less liquid used, the more pumping is required. Warning! Excessive pressure can result in spray drift, damaging nearby plants or articles.
To Spray: Depress trigger with the thumb. Turn the nozzle cap to right for ne spray; turn the nozzle to left for coarse spray or stream.
To Restore Pressure: Periodically pump sprayer to maintain tank pressure and desired spray pattern.
To Release Pressure: Unscrew the sprayer head slowly to allow air to escape. Or invert the sprayer and depress the trigger. Hold until all air escapes.
Salient Features
Maintenance is almost negligible; require neither any skilled technician nor any special tools.
Compact design & low weight utilize very small space.
No power consumption.
Easy to handle.
Unique fully-adjustable nozzle, allows to give you excellent and uniform liquid distribution.
Coverage area up to 4.5 Feet.
Locking system to avoid unnecessary spray.
